Service
Warehouse Epoxy in Los Angeles.
Warehouse and distribution-center floor systems engineered for forklift traffic, pallet jacks, and the constant abrasion of high-throughput logistics. Striping included in the same pour.
What warehouse epoxy actually is.
Warehouse and distribution-center floor systems engineered for forklift traffic, pallet jacks, and the constant abrasion of high-throughput logistics. Striping included in the same pour.
The system
- High-build systems (30-60 mils) for forklift traffic
- Color-coded lane striping and pedestrian aisles
- Anti-slip topcoats in receiving and pick zones
- Joint-fill polyurea for control joint maintenance
What it costs
Traffic load and prep depth set the system, and the system sets the number. Forklift lanes need a heavier build than storage bays. Square footage and downtime windows factor in. Quoted flat after a site visit.
How long it takes
Five to fifteen working days for typical warehouse square footage.
How long it lasts
15-25 years on the resin; striping refreshed every 5-7 years.
Where this fits
Distribution centers, fulfillment warehouses, manufacturing receiving, cold storage facilities, automotive parts warehouses.
How a warehouse epoxy floor actually gets poured.
01 Walkthrough
Owner on site. Moisture test of the slab. Photos of existing cracks. Palette options walked in person. Proposal in your inbox next morning.
02 Diamond grind
Surface prep to CSP-3 profile, HEPA vacuum, rapid-set polyurea on crack lines, re-grind. Where every floor lives or dies.
03 Pour
Resin mixed on site, broadcast or swirled to match the system. Signature work happens here. Notched-trowel finish before the working window closes.
04 Topcoat
Polyaspartic or polyurethane within the resin chemical window. Walkable 24 hours, full traffic 72 hours. Written job spec before we leave.
Where we install warehouse epoxy.
We pour warehouse epoxy across all of our service areas: Los Angeles County, Orange County, the Inland Empire, San Diego County, Ventura County, Kern County, and Santa Barbara County. The system itself is the same across cities. Substrate prep adjusts to local concrete age and moisture conditions.
Orange County
Inland Empire & beyond
Three rules we do not break on a warehouse epoxy install.
When a coating fails early, prep is almost always where it went wrong. So prep day is where we refuse to bargain, no matter the size of the budget. The rules below hold on every install.
01. Calibrated moisture testing
Calcium chloride or relative-humidity sleeve test on every warehouse epoxy substrate before we order resin. If the vapor emission rate is above manufacturer spec, we apply a moisture-mitigation primer at our cost rather than gamble on the topcoat bond. Skipping this is the most common cause of the failed coatings we get called in to re-prep.
02. Diamond grind to spec
CSP-3 minimum for residential warehouse epoxy, CSP-4 for high-build commercial. Shot blasting and acid etching are cheaper shortcuts that fail the resin manufacturer’s adhesion spec. We grind, HEPA-vacuum, polyurea-fill every visible crack, and re-grind. The prep day is the day the floor lives or fails.
03. Spec sheet with the resin maker named
Every warehouse epoxy proposal we write names the resin manufacturer, the topcoat product, the substrate prep depth, the cure window, and the maintenance schedule. If a competitor’s proposal does not name these, you are buying on faith, not specs. Full liability and workers’ comp on every job.
Questions before the call.
What does warehouse epoxy cost in Los Angeles?
Residential pricing for warehouse epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.
You get one fixed number, in writing, before any work starts. We set it after a free on-site walkthrough of about 30 minutes and email the proposal the next morning, so nothing gets added halfway through the pour.
How long does warehouse epoxy take to install?
A residential pour usually has us on site for two to three working days. The walkthrough tells us where your floor falls, since a larger home or a commercial space can stretch the job to anywhere from four to fifteen days depending on spec, substrate and footage.
The polyaspartic topcoat makes the floor walkable in 24 hours after the final coat. Full vehicle traffic returns at 72 hours.
How long will my warehouse epoxy last?
Installed right, the resin locks to the slab through a chemical bond. Residential systems are designed for that bond to hold for the life of the floor.
There are two answers, depending on the floor. Residential: the base resin holds, and the topcoat may need a refresh at 8 to 12 years with heavy use. Commercial: we spec the system to the traffic and chemistry it will face, and the resin layer typically lasts 10 to 25 years.
Can you match a specific color?
If it is a metallic system, yes. Past pours run from deep teal and copper-on-bronze to matte slate and ocean blue with charcoal veining, and the pigment will mix to shades well beyond those.
Flake systems come in pre-blended color packs and unlimited custom blends. Quartz comes in 14 standard colors plus custom mixes. Decorative concrete colors are added integrally during the pour or applied as a topical stain post-cure.
How does the install process actually work?
We start by testing the slab for moisture during the walkthrough, so we know what is coming up through the concrete before we coat it. The second stage is grinding to a CSP-3 profile and fixing cracks. Third is the pour, where the broadcast and any signature work happen. Fourth is the polyaspartic topcoat, followed by an inspection with you and a written spec of what we installed.
What happens after the floor is poured?
We schedule a check-in call at the three-year mark to look at the floor and the topcoat. Most floors need nothing at that point; a topcoat refresh usually comes years later, and we schedule it when the gloss actually fades. The base resin is bonded to the substrate for the life of the floor.
Once we are packed up, you should not need us for routine care. Damp-mop it when it looks dirty. Skip the waxes and sealers sold for bare concrete; this floor has no use for them.
What makes Concrete 2 Coatings different from other contractors?
The person who owns the company walks your job and is on site for every prep day. We are an independent shop, not a franchise, with 20 years of trade experience and training across coatings, decorative concrete and structural slabs. And we hold the line on prep: a CSP-3 diamond grind, a HEPA vacuum pass, then a second grind.
Pour warehouse epoxy at your place.
Free walkthrough in 30 minutes. Fixed-price proposal in your inbox the next morning. (714) 702-2567 or the form below.