Service area
Epoxy floors in Santa Monica.
Concrete 2 Coatings pours metallic epoxy, garage coatings, flake systems, polished concrete, and decorative concrete in Santa Monica, CA. Same union-trained crew, same owner, same fixed-price proposal.
Why Santa Monica clients call us.
Santa Monica is beach city, west of LA. The climate here brings coastal marine layer, salt-air corrosion, mild year-round. That climate matters for two reasons: substrate moisture and topcoat UV exposure.
Slab moisture in Santa Monica runs above the national average in winter and falls dramatically during summer heat. Every floor we pour starts with a calibrated moisture test, not a visual call. UV exposure on outdoor patios and pool decks rules out bare epoxy and pushes us to polyaspartic or UV-stable topcoat chemistry.
Where we pour in Santa Monica
North of Montana, Sunset Park, Ocean Park, Mid-City, and the rest of the Santa Monica footprint. Access via I-10. Most Santa Monica jobs schedule three to seven days out for the walkthrough, then four weeks out for residential pours, two weeks for commercial.
Most-requested in Santa Monica
- Metallic epoxy garage floors (the most-photographed system in our gallery)
- Garage coatings with flake-broadcast or quartz-broadcast traction
- Polyaspartic patio coatings (UV-stable, salt-air compatible on coastal jobs)
- Decorative concrete patios, walkways, pool decks
- Commercial epoxy for Santa Monica office, retail, restaurant, and warehouse spaces
Santa Monica, CA. We pour throughout the city, with I-10 as the primary access corridor.
Local context.
A few Santa Monica-specific notes that come up on most walkthroughs.
Climate
coastal marine layer, salt-air corrosion, mild year-round. Slab moisture testing is non-negotiable on every Santa Monica pour because of how the seasonal swings work here.
Access
Shop access via I-10. Santa Monica is within the 100-mile pour radius from Walton Avenue, Los Angeles.
Common substrates
Santa Monica residential garages are typically 4-inch poured concrete from the original construction era. Older homes particularly in older sub-areas sometimes need crack repair before any coating goes down.
Most-requested system
Metallic epoxy for residential garages, polyaspartic for patios and pool decks, decorative stamped concrete for backyard living spaces.
Santa Monica neighborhoods we pour in.
Santa Monica core
- North of Montana
- Sunset Park
Santa Monica mid
- Ocean Park
- Mid-City
What Santa Monica jobs actually look like.
Twelve months of Santa Monica work points at a consistent pattern: residential garage floors lead the volume, decorative concrete patios run second, commercial spec floors round out the rest.
Residential Santa Monica garages
Picking the color usually takes longer than putting the floor down. Once you settle on it, a typical garage gets metallic epoxy with a polyaspartic topcoat over two days. Most are two-car attached, 380 to 480 sq ft, poured somewhere between 15 and 60 years ago, and they almost always need some crack repair first. The proposal number moves with the size of the slab, how much crack work it takes, and which finish system you go with.
Santa Monica backyards and patios
Decorative concrete patios, pool decks, BBQ extensions, and walkways across the Santa Monica footprint. Most are 300 to 800 sq ft. Stamped concrete with two-color integral plus accent release prices out on pattern complexity, color count, and the condition of the base slab. The walkthrough takes 45 minutes so we can inspect drains, expansion joints, and any tile or wood deck the new pour ties into.
Small commercial + shop floors
Santa Monica retail backrooms, light industrial shops, restaurant kitchens, and detail-shop bays. Square footage usually 600 to 4,000. Polyaspartic-only systems for fast turnaround, quartz-broadcast where slip rating or USDA compliance matters. We schedule around operating hours; off-hours premium applies but the saved revenue usually offsets.
Questions before the call.
How fast can you get to a job in Santa Monica?
Santa Monica sits within the 100-mile pour radius from our Walton Avenue shop, accessed via I-10. Walkthroughs typically schedule three to seven days out. Pours book four weeks out for residential and two weeks for commercial.
Do you pour metallic epoxy in Santa Monica?
Yes. Metallic epoxy is one of our most-requested systems in Santa Monica, particularly for residential garage floors in North of Montana, Sunset Park, Ocean Park, and surrounding neighborhoods. The walkthrough is on us; the proposal lands the next morning.
What does Santa Monica epoxy cost in Los Angeles?
Residential pricing for Santa Monica epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.
Square footage, crack repair and the finish system drive the number, which is why we look before we price. The walkthrough is free and runs about 30 minutes, and your fixed-price proposal lands in your inbox the next morning.
How long does a Santa Monica job take to install?
A standard residential pour runs two to three working days from prep to final topcoat. Larger residential or commercial pours can run four to fifteen days depending on system spec, substrate condition, and square footage.
Once the final coat is down, stay off it for 24 hours. At 72 hours the floor takes full vehicle traffic.
What about Santa Monica climate, will the floor hold up?
The Santa Monica climate brings coastal marine layer, salt-air corrosion, mild year-round. Our system specs (polyaspartic topcoat for UV exposure, polyurea joint fill for thermal swing, calibrated moisture testing on prep day) account for these conditions specifically. Every floor we pour in Santa Monica is built to the same lifetime-adhesion spec we apply on coastal-marine, high-desert, or central-valley jobs.
What happens after the floor is poured?
The two layers age differently. The base resin is bonded to the substrate and stays put for the life of the floor. The topcoat is the part that takes the foot traffic and the tires, so that is the layer we look at again down the road and refresh when the gloss fades.
Day to day it cleans with a damp mop, which is all the upkeep the system asks for. You will not be buying wax or booking a resealing crew.
Pour in Santa Monica.
Free walkthrough on your slab in 30 minutes. Fixed-price proposal next morning. (714) 702-2567 or fill the form below.