Service area
Epoxy floors in Irvine.
Concrete 2 Coatings pours metallic epoxy, garage coatings, flake systems, polished concrete, and decorative concrete in Irvine, CA. Same union-trained crew, same owner, same fixed-price proposal.
Why Irvine clients call us.
Irvine is master-planned OC community. The climate here brings OC inland mild, marine layer reaches in early summer. That climate matters for two reasons: substrate moisture and topcoat UV exposure.
Slab moisture in Irvine runs above the national average in winter and falls dramatically during summer heat. Every floor we pour starts with a calibrated moisture test, not a visual call. UV exposure on outdoor patios and pool decks rules out bare epoxy and pushes us to polyaspartic or UV-stable topcoat chemistry.
Where we pour in Irvine
Woodbridge, University Park, Northwood, Quail Hill, Turtle Rock, Northpark, Cypress Village, and the rest of the Irvine footprint. Access via I-405, I-5, CA-55. Most Irvine jobs schedule three to seven days out for the walkthrough, then four weeks out for residential pours, two weeks for commercial.
Most-requested in Irvine
- Metallic epoxy garage floors (the most-photographed system in our gallery)
- Garage coatings with flake-broadcast or quartz-broadcast traction
- Polyaspartic patio coatings (UV-stable, salt-air compatible on coastal jobs)
- Decorative concrete patios, walkways, pool decks
- Commercial epoxy for Irvine office, retail, restaurant, and warehouse spaces
Irvine, CA. We pour throughout the city, with I-405 as the primary access corridor.
Local context.
A few Irvine-specific notes that come up on most walkthroughs.
Climate
OC inland mild, marine layer reaches in early summer. Slab moisture testing is non-negotiable on every Irvine pour because of how the seasonal swings work here.
Access
Shop access via I-405, I-5, CA-55, CA-133, CA-241. Irvine is within the 100-mile pour radius from Walton Avenue, Los Angeles.
Common substrates
Irvine residential garages are typically 4-inch poured concrete from the original construction era. Older homes in the 1940s-1960s neighborhoods sometimes need crack repair before any coating goes down.
Most-requested system
Metallic epoxy for residential garages, polyaspartic for patios and pool decks, decorative stamped concrete for backyard living spaces.
Irvine neighborhoods we pour in.
Irvine core
- Woodbridge
- University Park
- Northwood
Irvine mid
- Quail Hill
- Turtle Rock
- Northpark
Irvine outer
- Cypress Village
What Irvine jobs actually look like.
Twelve months of Irvine work points at a consistent pattern: residential garage floors lead the volume, decorative concrete patios run second, commercial spec floors round out the rest.
Residential Irvine garages
When a homeowner calls about a garage, it is usually a two-car attached space of 380 to 480 sq ft on a slab somewhere between 15 and 60 years old. We nearly always find cracks that need light to moderate repair before anything gets coated. From there it is our standard metallic epoxy with a polyaspartic topcoat, two days on site. Square footage, crack repair and the finish system set the price, and most of the back and forth happens over color.
Irvine backyards and patios
Decorative concrete patios, pool decks, BBQ extensions, and walkways across the Irvine footprint. Most are 300 to 800 sq ft. Stamped concrete with two-color integral plus accent release prices out on pattern complexity, color count, and the condition of the base slab. The walkthrough takes 45 minutes so we can inspect drains, expansion joints, and any tile or wood deck the new pour ties into.
Small commercial + shop floors
Irvine retail backrooms, light industrial shops, restaurant kitchens, and detail-shop bays. Square footage usually 600 to 4,000. Polyaspartic-only systems for fast turnaround, quartz-broadcast where slip rating or USDA compliance matters. We schedule around operating hours; off-hours premium applies but the saved revenue usually offsets.
Questions before the call.
How fast can you get to a job in Irvine?
Irvine sits within the 100-mile pour radius from our Walton Avenue shop, accessed via I-405 and I-5. Walkthroughs typically schedule three to seven days out. Pours book four weeks out for residential and two weeks for commercial.
Do you pour metallic epoxy in Irvine?
Yes. Metallic epoxy is one of our most-requested systems in Irvine, particularly for residential garage floors in Woodbridge, University Park, Northwood, and surrounding neighborhoods. The walkthrough is on us; the proposal lands the next morning.
What does Irvine epoxy cost in Los Angeles?
Residential pricing for Irvine epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.
Square footage, crack repair and the finish system drive the number, which is why we look before we price. The walkthrough is free and runs about 30 minutes, and your fixed-price proposal lands in your inbox the next morning.
How long does a Irvine job take to install?
On most homes we are in and out in two to three working days, and that covers grinding, crack repair, the pour and the topcoat; the walkthrough and moisture test happen before we book the days. Larger residential floors and commercial work run four to fifteen days.
Vehicles and rolling loads stay off for 72 hours after the last coat. People can walk across the floor after the first 24.
What about Irvine climate, will the floor hold up?
The Irvine climate brings OC inland mild, marine layer reaches in early summer. Our system specs (polyaspartic topcoat for UV exposure, polyurea joint fill for thermal swing, calibrated moisture testing on prep day) account for these conditions specifically. Every floor we pour in Irvine is built to the same lifetime-adhesion spec we apply on coastal-marine, high-desert, or central-valley jobs.
What happens after the floor is poured?
Most of what decides how the floor ages happened on prep day, before the pour. Once it cures, the floor mostly takes care of itself: the base resin stays bonded to the substrate for the life of the floor, and only the gloss layer on top ever gets a second visit from us.
Upkeep is a mop and a bucket of water. The topcoat carries the protection, so you never roll on sealer or schedule a yearly wax.
Pour in Irvine.
Free walkthrough on your slab in 30 minutes. Fixed-price proposal next morning. (714) 702-2567 or fill the form below.