Flake Epoxy in Los Angeles.

Residential pricing for flake epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.

You get one fixed number, in writing, before any work starts. We set it after a free on-site walkthrough of about 30 minutes and email the proposal the next morning, so nothing gets added halfway through the pour.

A residential pour usually has us on site for two to three working days. The walkthrough tells us where your floor falls, since a larger home or a commercial space can stretch the job to anywhere from four to fifteen days depending on spec, substrate and footage.

The polyaspartic topcoat cures fast, so the wait after we finish is short: one day before foot traffic, three days before anything on wheels.

Properly installed resinous floor systems are not cosmetic. They are a chemical bond to the substrate. Residential floors are engineered for lifetime adhesion to the slab.

On a commercial floor, the spec is set by the traffic and the chemicals the floor will see, and the resin layer typically lasts 10 to 25 years. At home, a heavy-use floor may want a fresh polyaspartic topcoat somewhere between years 8 and 12, with the base staying bonded underneath.

Yes. Metallic epoxy pigments mix to any color in the spectrum. We have poured deep teal, copper-on-bronze, matte slate, mother-of-pearl, ocean blue with charcoal veining, and just-black.

For decorative concrete there are two routes: integral color mixed in during the pour, or a topical stain once the slab has cured. Coatings give you more room. Flake comes in pre-blended packs or any custom blend, and quartz offers 14 standard colors plus custom mixes.

The heaviest work lands on day two, when we diamond-grind the slab to a CSP-3 profile and repair the cracks. That follows a first day spent on the walkthrough and a moisture test. Day three is the pour and broadcast, along with any signature work, and day four is the polyaspartic topcoat. A final inspection with you and a written job spec close it out.

You deal with the same people after the pour that you dealt with before it. The owner walks every job, so if something about the finish looks off to you, that is who you talk to. The resin bonded to your slab stays where it is; the topcoat is the only layer that ever needs attention.

Day to day, the floor maintains with a damp mop. No waxing, no sealing, no annual service appointment. The system is engineered to live without us.

The person who owns the company walks your job and is on site for every prep day. We are an independent shop, not a franchise, with 20 years of trade experience and training across coatings, decorative concrete and structural slabs. And we hold the line on prep: a CSP-3 diamond grind, a HEPA vacuum pass, then a second grind.