Service area
Epoxy floors in Fullerton.
Concrete 2 Coatings pours metallic epoxy, garage coatings, flake systems, polished concrete, and decorative concrete in Fullerton, CA. Same union-trained crew, same owner, same fixed-price proposal.
Why Fullerton clients call us.
Fullerton is north OC city. The climate here brings OC inland warmth. That climate matters for two reasons: substrate moisture and topcoat UV exposure.
Slab moisture in Fullerton runs above the national average in winter and falls dramatically during summer heat. Every floor we pour starts with a calibrated moisture test, not a visual call. UV exposure on outdoor patios and pool decks rules out bare epoxy and pushes us to polyaspartic or UV-stable topcoat chemistry.
Where we pour in Fullerton
Raymond Hills, Sunny Hills, West Fullerton, Downtown Fullerton, and the rest of the Fullerton footprint. Access via CA-91, CA-57, I-5. Most Fullerton jobs schedule three to seven days out for the walkthrough, then four weeks out for residential pours, two weeks for commercial.
Most-requested in Fullerton
- Metallic epoxy garage floors (the most-photographed system in our gallery)
- Garage coatings with flake-broadcast or quartz-broadcast traction
- Polyaspartic patio coatings (UV-stable, salt-air compatible on coastal jobs)
- Decorative concrete patios, walkways, pool decks
- Commercial epoxy for Fullerton office, retail, restaurant, and warehouse spaces
Fullerton, CA. We pour throughout the city, with CA-91 as the primary access corridor.
Local context.
A few Fullerton-specific notes that come up on most walkthroughs.
Climate
OC inland warmth. Slab moisture testing is non-negotiable on every Fullerton pour because of how the seasonal swings work here.
Access
Shop access via CA-91, CA-57, I-5. Fullerton is within the 100-mile pour radius from Walton Avenue, Los Angeles.
Common substrates
Fullerton residential garages are typically 4-inch poured concrete from the original construction era. Older homes particularly in older sub-areas sometimes need crack repair before any coating goes down.
Most-requested system
Metallic epoxy for residential garages, polyaspartic for patios and pool decks, decorative stamped concrete for backyard living spaces.
Fullerton neighborhoods we pour in.
Fullerton core
- Raymond Hills
- Sunny Hills
Fullerton mid
- West Fullerton
- Downtown Fullerton
What Fullerton jobs actually look like.
Twelve months of Fullerton work points at a consistent pattern: residential garage floors lead the volume, decorative concrete patios run second, commercial spec floors round out the rest.
Residential Fullerton garages
Most garage jobs are done in two days. The system is metallic epoxy with a polyaspartic topcoat, laid over a slab we have repaired first, since cracks are close to universal on concrete that is 15 to 60 years old. The usual space is a two-car attached garage of 380 to 480 sq ft. The install is simple; the color conversation is where people take their time.
Fullerton backyards and patios
Decorative concrete patios, pool decks, BBQ extensions, and walkways across the Fullerton footprint. Most are 300 to 800 sq ft. Stamped concrete with two-color integral plus accent release prices out on pattern complexity, color count, and the condition of the base slab. The walkthrough takes 45 minutes so we can inspect drains, expansion joints, and any tile or wood deck the new pour ties into.
Small commercial + shop floors
Fullerton retail backrooms, light industrial shops, restaurant kitchens, and detail-shop bays. Square footage usually 600 to 4,000. Polyaspartic-only systems for fast turnaround, quartz-broadcast where slip rating or USDA compliance matters. We schedule around operating hours; off-hours premium applies but the saved revenue usually offsets.
Questions before the call.
How fast can you get to a job in Fullerton?
Fullerton sits within the 100-mile pour radius from our Walton Avenue shop, accessed via CA-91 and CA-57. Walkthroughs typically schedule three to seven days out. Pours book four weeks out for residential and two weeks for commercial.
Do you pour metallic epoxy in Fullerton?
Yes. Metallic epoxy is one of our most-requested systems in Fullerton, particularly for residential garage floors in Raymond Hills, Sunny Hills, West Fullerton, and surrounding neighborhoods. The walkthrough is on us; the proposal lands the next morning.
What does Fullerton epoxy cost in Los Angeles?
Residential pricing for Fullerton epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.
You get one fixed number, in writing, before any work starts. We set it after a free on-site walkthrough of about 30 minutes and email the proposal the next morning, so nothing gets added halfway through the pour.
How long does a Fullerton job take to install?
Plan on two to three working days for a typical home, counting prep through the final topcoat. Commercial floors and bigger residential jobs take longer, anywhere from four to fifteen days, set by the system spec, the slab’s condition and the square footage.
The polyaspartic topcoat makes the floor walkable in 24 hours after the final coat. Full vehicle traffic returns at 72 hours.
What about Fullerton climate, will the floor hold up?
The Fullerton climate brings OC inland warmth. Our system specs (polyaspartic topcoat for UV exposure, polyurea joint fill for thermal swing, calibrated moisture testing on prep day) account for these conditions specifically. Every floor we pour in Fullerton is built to the same lifetime-adhesion spec we apply on coastal-marine, high-desert, or central-valley jobs.
What happens after the floor is poured?
We schedule a check-in call at the three-year mark to look at the floor and the topcoat. Most floors need nothing at that point; a topcoat refresh usually comes years later, and we schedule it when the gloss actually fades. The base resin is bonded to the substrate for the life of the floor.
Day to day, the floor maintains with a damp mop. No waxing, no sealing, no annual service appointment. The system is engineered to live without us.
Pour in Fullerton.
Free walkthrough on your slab in 30 minutes. Fixed-price proposal next morning. (714) 702-2567 or fill the form below.