Hospitality Epoxy in Los Angeles.

Residential pricing for hospitality epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.

You get one fixed number, in writing, before any work starts. We set it after a free on-site walkthrough of about 30 minutes and email the proposal the next morning, so nothing gets added halfway through the pour.

A residential pour usually has us on site for two to three working days. The walkthrough tells us where your floor falls, since a larger home or a commercial space can stretch the job to anywhere from four to fifteen days depending on spec, substrate and footage.

The polyaspartic topcoat makes the floor walkable in 24 hours after the final coat. Full vehicle traffic returns at 72 hours.

Installed right, the resin locks to the slab through a chemical bond. Residential systems are designed for that bond to hold for the life of the floor.

There are two answers, depending on the floor. Residential: the base resin holds, and the topcoat may need a refresh at 8 to 12 years with heavy use. Commercial: we spec the system to the traffic and chemistry it will face, and the resin layer typically lasts 10 to 25 years.

If it is a metallic system, yes. Past pours run from deep teal and copper-on-bronze to matte slate and ocean blue with charcoal veining, and the pigment will mix to shades well beyond those.

For decorative concrete there are two routes: integral color mixed in during the pour, or a topical stain once the slab has cured. Coatings give you more room. Flake comes in pre-blended packs or any custom blend, and quartz offers 14 standard colors plus custom mixes.

We start by testing the slab for moisture during the walkthrough, so we know what is coming up through the concrete before we coat it. The second stage is grinding to a CSP-3 profile and fixing cracks. Third is the pour, where the broadcast and any signature work happen. Fourth is the polyaspartic topcoat, followed by an inspection with you and a written spec of what we installed.

We schedule a check-in call at the three-year mark to look at the floor and the topcoat. Most floors need nothing at that point; a topcoat refresh usually comes years later, and we schedule it when the gloss actually fades. The base resin is bonded to the substrate for the life of the floor.

There is no maintenance plan to sign up for. We built the system so it does not need one: mop it damp when it gets dirty and leave it be the rest of the time.

Three things, honestly. One, the owner walks every job and is on every prep day. We are not a franchise. Two, we are licensed and trained across resinous coatings AND decorative concrete AND structural slabs. Most LA shops pick one trade. Three, surface prep is non-negotiable: diamond-grind to CSP-3, HEPA-vacuum, re-grind. Most cosmetic failures trace back to skipped prep.