Service area
Epoxy floors in San Bernardino.
Concrete 2 Coatings pours metallic epoxy, garage coatings, flake systems, polished concrete, and decorative concrete in San Bernardino, CA. Same union-trained crew, same owner, same fixed-price proposal.
Why San Bernardino clients call us.
San Bernardino is IE county seat. The climate here brings IE inland heat, wildfire-adjacent autumns. That climate matters for two reasons: substrate moisture and topcoat UV exposure.
Slab moisture in San Bernardino runs above the national average in winter and falls dramatically during summer heat. Every floor we pour starts with a calibrated moisture test, not a visual call. UV exposure on outdoor patios and pool decks rules out bare epoxy and pushes us to polyaspartic or UV-stable topcoat chemistry.
Where we pour in San Bernardino
Verdemont, Arrowhead Farms, Devore Heights, North End, Del Rosa, and the rest of the San Bernardino footprint. Access via I-215, I-10, I-15. Most San Bernardino jobs schedule three to seven days out for the walkthrough, then four weeks out for residential pours, two weeks for commercial.
Most-requested in San Bernardino
- Metallic epoxy garage floors (the most-photographed system in our gallery)
- Garage coatings with flake-broadcast or quartz-broadcast traction
- Polyaspartic patio coatings (UV-stable, salt-air compatible on coastal jobs)
- Decorative concrete patios, walkways, pool decks
- Commercial epoxy for San Bernardino office, retail, restaurant, and warehouse spaces
San Bernardino, CA. We pour throughout the city, with I-215 as the primary access corridor.
Local context.
A few San Bernardino-specific notes that come up on most walkthroughs.
Climate
IE inland heat, wildfire-adjacent autumns. Slab moisture testing is non-negotiable on every San Bernardino pour because of how the seasonal swings work here.
Access
Shop access via I-215, I-10, I-15, CA-210. San Bernardino is within the 100-mile pour radius from Walton Avenue, Los Angeles.
Common substrates
San Bernardino residential garages are typically 4-inch poured concrete from the original construction era. Older homes in the 1940s-1960s neighborhoods sometimes need crack repair before any coating goes down.
Most-requested system
Metallic epoxy for residential garages, polyaspartic for patios and pool decks, decorative stamped concrete for backyard living spaces.
San Bernardino neighborhoods we pour in.
San Bernardino core
- Verdemont
- Arrowhead Farms
San Bernardino mid
- Devore Heights
- North End
San Bernardino outer
- Del Rosa
What San Bernardino jobs actually look like.
Twelve months of San Bernardino work points at a consistent pattern: residential garage floors lead the volume, decorative concrete patios run second, commercial spec floors round out the rest.
Residential San Bernardino garages
The slabs we see in garages usually run 15 to 60 years old, and nearly all of them have cracks that get repaired before any resin goes down. Most are two-car attached garages between 380 and 480 sq ft. Our standard build is metallic epoxy under a polyaspartic topcoat, installed over two days. Your price comes down to the footage, the crack work, and the finish system you choose.
San Bernardino backyards and patios
Decorative concrete patios, pool decks, BBQ extensions, and walkways across the San Bernardino footprint. Most are 300 to 800 sq ft. Stamped concrete with two-color integral plus accent release prices out on pattern complexity, color count, and the condition of the base slab. The walkthrough takes 45 minutes so we can inspect drains, expansion joints, and any tile or wood deck the new pour ties into.
Small commercial + shop floors
San Bernardino retail backrooms, light industrial shops, restaurant kitchens, and detail-shop bays. Square footage usually 600 to 4,000. Polyaspartic-only systems for fast turnaround, quartz-broadcast where slip rating or USDA compliance matters. We schedule around operating hours; off-hours premium applies but the saved revenue usually offsets.
Questions before the call.
How fast can you get to a job in San Bernardino?
San Bernardino sits within the 100-mile pour radius from our Walton Avenue shop, accessed via I-215 and I-10. Walkthroughs typically schedule three to seven days out. Pours book four weeks out for residential and two weeks for commercial.
Do you pour metallic epoxy in San Bernardino?
Yes. Metallic epoxy is one of our most-requested systems in San Bernardino, particularly for residential garage floors in Verdemont, Arrowhead Farms, Devore Heights, and surrounding neighborhoods. The walkthrough is on us; the proposal lands the next morning.
What does San Bernardino epoxy cost in Los Angeles?
Residential pricing for San Bernardino epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.
You get one fixed number, in writing, before any work starts. We set it after a free on-site walkthrough of about 30 minutes and email the proposal the next morning, so nothing gets added halfway through the pour.
How long does a San Bernardino job take to install?
Plan on two to three working days for a typical home, counting prep through the final topcoat. Commercial floors and bigger residential jobs take longer, anywhere from four to fifteen days, set by the system spec, the slab’s condition and the square footage.
The cure is quick. Foot traffic is fine a day after the topcoat, and vehicles can come back in after three days.
What about San Bernardino climate, will the floor hold up?
The San Bernardino climate brings IE inland heat, wildfire-adjacent autumns. Our system specs (polyaspartic topcoat for UV exposure, polyurea joint fill for thermal swing, calibrated moisture testing on prep day) account for these conditions specifically. Every floor we pour in San Bernardino is built to the same lifetime-adhesion spec we apply on coastal-marine, high-desert, or central-valley jobs.
What happens after the floor is poured?
We schedule a check-in call at the three-year mark to look at the floor and the topcoat. Most floors need nothing at that point; a topcoat refresh usually comes years later, and we schedule it when the gloss actually fades. The base resin is bonded to the substrate for the life of the floor.
There is no maintenance plan to sign up for. We built the system so it does not need one: mop it damp when it gets dirty and leave it be the rest of the time.
Pour in San Bernardino.
Free walkthrough on your slab in 30 minutes. Fixed-price proposal next morning. (714) 702-2567 or fill the form below.