Skip to content
Concrete2Coatings
Concrete 2 Coatings flooring work

Service area

Epoxy floors in Ontario.

Concrete 2 Coatings pours metallic epoxy, garage coatings, flake systems, polished concrete, and decorative concrete in Ontario, CA. Same union-trained crew, same owner, same fixed-price proposal.

Why Ontario clients call us.

IE airport city. Pop: 175k. Climate: IE inland warmth.
Concrete 2 Coatings serving Ontario, California
Recent Ontario install.

Ontario is IE airport city. The climate here brings IE inland warmth. That climate matters for two reasons: substrate moisture and topcoat UV exposure.

Slab moisture in Ontario runs above the national average in winter and falls dramatically during summer heat. Every floor we pour starts with a calibrated moisture test, not a visual call. UV exposure on outdoor patios and pool decks rules out bare epoxy and pushes us to polyaspartic or UV-stable topcoat chemistry.

Where we pour in Ontario

Ontario Ranch, Sycamore Hills, Country Club Estates, and the rest of the Ontario footprint. Access via I-10, I-15, CA-60. Most Ontario jobs schedule three to seven days out for the walkthrough, then four weeks out for residential pours, two weeks for commercial.

Most-requested in Ontario

Ontario, CA. We pour throughout the city, with I-10 as the primary access corridor.

Local context.

A few Ontario-specific notes that come up on most walkthroughs.

Ontario climate context for floor coating projects

Climate

IE inland warmth. Slab moisture testing is non-negotiable on every Ontario pour because of how the seasonal swings work here.

Concrete 2 Coatings service truck en route to Ontario

Access

Shop access via I-10, I-15, CA-60. Ontario is within the 100-mile pour radius from Walton Avenue, Los Angeles.

Typical residential garage substrate in Ontario

Common substrates

Ontario residential garages are typically 4-inch poured concrete from the original construction era. Older homes particularly in older sub-areas sometimes need crack repair before any coating goes down.

Most-requested system in Ontario: metallic epoxy

Most-requested system

Metallic epoxy for residential garages, polyaspartic for patios and pool decks, decorative stamped concrete for backyard living spaces.

Ontario neighborhoods we pour in.

Ontario core

  • Ontario Ranch

Ontario mid

  • Sycamore Hills

Ontario outer

  • Country Club Estates

What Ontario jobs actually look like.

Twelve months of Ontario work points at a consistent pattern: residential garage floors lead the volume, decorative concrete patios run second, commercial spec floors round out the rest.

Residential garage epoxy install in Ontario

Residential Ontario garages

When a homeowner calls about a garage, it is usually a two-car attached space of 380 to 480 sq ft on a slab somewhere between 15 and 60 years old. We nearly always find cracks that need light to moderate repair before anything gets coated. From there it is our standard metallic epoxy with a polyaspartic topcoat, two days on site. Square footage, crack repair and the finish system set the price, and most of the back and forth happens over color.

Decorative concrete patio in Ontario

Ontario backyards and patios

Decorative concrete patios, pool decks, BBQ extensions, and walkways across the Ontario footprint. Most are 300 to 800 sq ft. Stamped concrete with two-color integral plus accent release prices out on pattern complexity, color count, and the condition of the base slab. The walkthrough takes 45 minutes so we can inspect drains, expansion joints, and any tile or wood deck the new pour ties into.

Commercial epoxy floor in Ontario

Small commercial + shop floors

Ontario retail backrooms, light industrial shops, restaurant kitchens, and detail-shop bays. Square footage usually 600 to 4,000. Polyaspartic-only systems for fast turnaround, quartz-broadcast where slip rating or USDA compliance matters. We schedule around operating hours; off-hours premium applies but the saved revenue usually offsets.

Questions before the call.

How fast can you get to a job in Ontario?

Ontario sits within the 100-mile pour radius from our Walton Avenue shop, accessed via I-10 and I-15. Walkthroughs typically schedule three to seven days out. Pours book four weeks out for residential and two weeks for commercial.

Do you pour metallic epoxy in Ontario?

Yes. Metallic epoxy is one of our most-requested systems in Ontario, particularly for residential garage floors in Ontario Ranch, Sycamore Hills, Country Club Estates, and surrounding neighborhoods. The walkthrough is on us; the proposal lands the next morning.

What does Ontario epoxy cost in Los Angeles?

Residential pricing for Ontario epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.

It depends on your slab, so we price it in person. The walkthrough costs nothing and takes about half an hour. The next morning you get a fixed price by email, and that number holds through the pour.

How long does a Ontario job take to install?

A standard residential pour runs two to three working days from prep to final topcoat. Larger residential or commercial pours can run four to fifteen days depending on system spec, substrate condition, and square footage.

You can walk on it 24 hours after the last coat of polyaspartic goes down. Give it 72 hours before vehicles or heavy equipment roll on it.

What about Ontario climate, will the floor hold up?

The Ontario climate brings IE inland warmth. Our system specs (polyaspartic topcoat for UV exposure, polyurea joint fill for thermal swing, calibrated moisture testing on prep day) account for these conditions specifically. Every floor we pour in Ontario is built to the same lifetime-adhesion spec we apply on coastal-marine, high-desert, or central-valley jobs.

What happens after the floor is poured?

The two layers age differently. The base resin is bonded to the substrate and stays put for the life of the floor. The topcoat is the part that takes the foot traffic and the tires, so that is the layer we look at again down the road and refresh when the gloss fades.

Day to day it cleans with a damp mop, which is all the upkeep the system asks for. You will not be buying wax or booking a resealing crew.

Metallic epoxy floor poured by Concrete 2 Coatings in Los Angeles

Pour in Ontario.

Free walkthrough on your slab in 30 minutes. Fixed-price proposal next morning. (714) 702-2567 or fill the form below.