Service
Commercial Shop Floors in Los Angeles.
Heavy-duty commercial shop floor pours and coating systems. Structural slab plus the resinous floor system on top, sized to the equipment loads coming through. Auto, fabrication, woodworking, machine, paint, body, and detail shops.
What commercial shop floors actually is.
Heavy-duty commercial shop floor pours and coating systems. Structural slab plus the resinous floor system on top, sized to the equipment loads coming through. Auto, fabrication, woodworking, machine, paint, body, and detail shops.
The system
- Engineered slab thickness for equipment loads
- High-build epoxy or urethane cement topcoat
- Slip-rated and chemical-resistant systems
- Striping included for safety and workflow zones
What it costs
The complete floor system prices on square footage, slab condition, and how much oil and old coating has to come off first. Slip rating and cove base add to it. We put a number on it after walking the shop.
How long it takes
Five to fifteen working days depending on system and square footage.
How long it lasts
25+ years for the slab, 15-20 for the topcoat system.
Where this fits
Auto shops, fabrication shops, woodworking shops, machine shops, body and paint shops, detail bays, fleet maintenance facilities.
How a commercial shop floors floor actually gets poured.
01 Walkthrough
Owner on site. Moisture test of the slab. Photos of existing cracks. Palette options walked in person. Proposal in your inbox next morning.
02 Diamond grind
Surface prep to CSP-3 profile, HEPA vacuum, rapid-set polyurea on crack lines, re-grind. Where every floor lives or dies.
03 Pour
Resin mixed on site, broadcast or swirled to match the system. Signature work happens here. Notched-trowel finish before the working window closes.
04 Topcoat
Polyaspartic or polyurethane within the resin chemical window. Walkable 24 hours, full traffic 72 hours. Written job spec before we leave.
Where we install commercial shop floors.
We pour commercial shop floors across all of our service areas: Los Angeles County, Orange County, the Inland Empire, San Diego County, Ventura County, Kern County, and Santa Barbara County. The system itself is the same across cities. Substrate prep adjusts to local concrete age and moisture conditions.
Orange County
Inland Empire & beyond
Three rules we do not break on a commercial shop floors install.
Grinding, vacuuming and crack repair take up the day before the pour, and they decide more about how long the coating lasts than anything that comes after. Here is the prep we keep in every proposal, at any budget.
01. Calibrated moisture testing
Calcium chloride or relative-humidity sleeve test on every commercial shop floors substrate before we order resin. If the vapor emission rate is above manufacturer spec, we apply a moisture-mitigation primer at our cost rather than gamble on the topcoat bond. Skipping this is the most common cause of the failed coatings we get called in to re-prep.
02. Diamond grind to spec
CSP-3 minimum for residential commercial shop floors, CSP-4 for high-build commercial. Shot blasting and acid etching are cheaper shortcuts that fail the resin manufacturer’s adhesion spec. We grind, HEPA-vacuum, polyurea-fill every visible crack, and re-grind. The prep day is the day the floor lives or fails.
03. Spec sheet with the resin maker named
Every commercial shop floors proposal we write names the resin manufacturer, the topcoat product, the substrate prep depth, the cure window, and the maintenance schedule. If a competitor’s proposal does not name these, you are buying on faith, not specs. Full liability and workers’ comp on every job.
Questions before the call.
What does commercial shop floors cost in Los Angeles?
Residential pricing for commercial shop floors in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.
We write fixed-price proposals after the on-site walkthrough so there are no change orders mid-pour. Walkthrough is free, takes about 30 minutes, and you have the proposal in your inbox the next morning.
How long does commercial shop floors take to install?
Plan on two to three working days for a typical home, counting prep through the final topcoat. Commercial floors and bigger residential jobs take longer, anywhere from four to fifteen days, set by the system spec, the slab’s condition and the square footage.
The cure is quick. Foot traffic is fine a day after the topcoat, and vehicles can come back in after three days.
How long will my commercial shop floors last?
On a home, the bond to the slab is meant to last as long as the slab does. That comes from the chemistry: a properly installed resinous system bonds into the prepared substrate.
There are two answers, depending on the floor. Residential: the base resin holds, and the topcoat may need a refresh at 8 to 12 years with heavy use. Commercial: we spec the system to the traffic and chemistry it will face, and the resin layer typically lasts 10 to 25 years.
Can you match a specific color?
Metallic pigment can be mixed to any color you bring us. A few we have poured: deep teal, matte slate and mother-of-pearl.
Flake systems come in pre-blended color packs and unlimited custom blends. Quartz comes in 14 standard colors plus custom mixes. Decorative concrete colors are added integrally during the pour or applied as a topical stain post-cure.
How does the install process actually work?
We start by testing the slab for moisture during the walkthrough, so we know what is coming up through the concrete before we coat it. The second stage is grinding to a CSP-3 profile and fixing cracks. Third is the pour, where the broadcast and any signature work happen. Fourth is the polyaspartic topcoat, followed by an inspection with you and a written spec of what we installed.
What happens after the floor is poured?
We schedule a check-in call at the three-year mark to look at the floor and the topcoat. Most floors need nothing at that point; a topcoat refresh usually comes years later, and we schedule it when the gloss actually fades. The base resin is bonded to the substrate for the life of the floor.
Day to day, the floor maintains with a damp mop. No waxing, no sealing, no annual service appointment. The system is engineered to live without us.
What makes Concrete 2 Coatings different from other contractors?
The person who owns the company walks your job and is on site for every prep day. We are an independent shop, not a franchise, with 20 years of trade experience and training across coatings, decorative concrete and structural slabs. And we hold the line on prep: a CSP-3 diamond grind, a HEPA vacuum pass, then a second grind.
Pour commercial shop floors at your place.
Free walkthrough in 30 minutes. Fixed-price proposal in your inbox the next morning. (714) 702-2567 or the form below.