Service area
Epoxy floors in Inglewood.
Concrete 2 Coatings pours metallic epoxy, garage coatings, flake systems, polished concrete, and decorative concrete in Inglewood, CA. Same union-trained crew, same owner, same fixed-price proposal.
Why Inglewood clients call us.
Inglewood is South LA Forum/SoFi adjacent. The climate here brings coastal marine layer reaching inland, mild summers. That climate matters for two reasons: substrate moisture and topcoat UV exposure.
Slab moisture in Inglewood runs above the national average in winter and falls dramatically during summer heat. Every floor we pour starts with a calibrated moisture test, not a visual call. UV exposure on outdoor patios and pool decks rules out bare epoxy and pushes us to polyaspartic or UV-stable topcoat chemistry.
Where we pour in Inglewood
Morningside Park, North Inglewood, Crenshaw, Briarwood, and the rest of the Inglewood footprint. Access via I-405, I-105, CA-90. Most Inglewood jobs schedule three to seven days out for the walkthrough, then four weeks out for residential pours, two weeks for commercial.
Most-requested in Inglewood
- Metallic epoxy garage floors (the most-photographed system in our gallery)
- Garage coatings with flake-broadcast or quartz-broadcast traction
- Polyaspartic patio coatings (UV-stable, salt-air compatible on coastal jobs)
- Decorative concrete patios, walkways, pool decks
- Commercial epoxy for Inglewood office, retail, restaurant, and warehouse spaces
Inglewood, CA. We pour throughout the city, with I-405 as the primary access corridor.
Local context.
A few Inglewood-specific notes that come up on most walkthroughs.
Climate
coastal marine layer reaching inland, mild summers. Slab moisture testing is non-negotiable on every Inglewood pour because of how the seasonal swings work here.
Access
Shop access via I-405, I-105, CA-90. Inglewood is within the 100-mile pour radius from Walton Avenue, Los Angeles.
Common substrates
Inglewood residential garages are typically 4-inch poured concrete from the original construction era. Older homes particularly in older sub-areas sometimes need crack repair before any coating goes down.
Most-requested system
Metallic epoxy for residential garages, polyaspartic for patios and pool decks, decorative stamped concrete for backyard living spaces.
Inglewood neighborhoods we pour in.
Inglewood core
- Morningside Park
- North Inglewood
Inglewood mid
- Crenshaw
- Briarwood
What Inglewood jobs actually look like.
Twelve months of Inglewood work points at a consistent pattern: residential garage floors lead the volume, decorative concrete patios run second, commercial spec floors round out the rest.
Residential Inglewood garages
This is the call we get most. Crack repair comes before coating on almost every one of these garages, because the slabs tend to be 15 to 60 years old. Sizes stay pretty consistent too: two-car attached, 380 to 480 sq ft. After the repair we lay metallic epoxy and finish it with polyaspartic, a two-day install. If anything slows the job down, it is choosing a color, and that gets settled in the proposal before we show up.
Inglewood backyards and patios
Decorative concrete patios, pool decks, BBQ extensions, and walkways across the Inglewood footprint. Most are 300 to 800 sq ft. Stamped concrete with two-color integral plus accent release prices out on pattern complexity, color count, and the condition of the base slab. The walkthrough takes 45 minutes so we can inspect drains, expansion joints, and any tile or wood deck the new pour ties into.
Small commercial + shop floors
Inglewood retail backrooms, light industrial shops, restaurant kitchens, and detail-shop bays. Square footage usually 600 to 4,000. Polyaspartic-only systems for fast turnaround, quartz-broadcast where slip rating or USDA compliance matters. We schedule around operating hours; off-hours premium applies but the saved revenue usually offsets.
Questions before the call.
How fast can you get to a job in Inglewood?
Inglewood sits within the 100-mile pour radius from our Walton Avenue shop, accessed via I-405 and I-105. Walkthroughs typically schedule three to seven days out. Pours book four weeks out for residential and two weeks for commercial.
Do you pour metallic epoxy in Inglewood?
Yes. Metallic epoxy is one of our most-requested systems in Inglewood, particularly for residential garage floors in Morningside Park, North Inglewood, Crenshaw, and surrounding neighborhoods. The walkthrough is on us; the proposal lands the next morning.
What does Inglewood epoxy cost in Los Angeles?
Residential pricing for Inglewood epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.
We write fixed-price proposals after the on-site walkthrough so there are no change orders mid-pour. Walkthrough is free, takes about 30 minutes, and you have the proposal in your inbox the next morning.
How long does a Inglewood job take to install?
A residential pour usually has us on site for two to three working days. The walkthrough tells us where your floor falls, since a larger home or a commercial space can stretch the job to anywhere from four to fifteen days depending on spec, substrate and footage.
The polyaspartic topcoat makes the floor walkable in 24 hours after the final coat. Full vehicle traffic returns at 72 hours.
What about Inglewood climate, will the floor hold up?
The Inglewood climate brings coastal marine layer reaching inland, mild summers. Our system specs (polyaspartic topcoat for UV exposure, polyurea joint fill for thermal swing, calibrated moisture testing on prep day) account for these conditions specifically. Every floor we pour in Inglewood is built to the same lifetime-adhesion spec we apply on coastal-marine, high-desert, or central-valley jobs.
What happens after the floor is poured?
We schedule a check-in call at the three-year mark to look at the floor and the topcoat. Most floors need nothing at that point; a topcoat refresh usually comes years later, and we schedule it when the gloss actually fades. The base resin is bonded to the substrate for the life of the floor.
There is no maintenance plan to sign up for. We built the system so it does not need one: mop it damp when it gets dirty and leave it be the rest of the time.
Pour in Inglewood.
Free walkthrough on your slab in 30 minutes. Fixed-price proposal next morning. (714) 702-2567 or fill the form below.