Service area
Epoxy floors in Los Angeles.
Concrete 2 Coatings pours metallic epoxy, garage coatings, flake systems, polished concrete, and decorative concrete in Los Angeles, CA. Same union-trained crew, same owner, same fixed-price proposal.
Why Los Angeles clients call us.
Los Angeles is metro center of LA County. The climate here brings marine-layer mornings, summer heat domes pushing into the basin, occasional Santa Ana wind events that swing humidity hard. That climate matters for two reasons: substrate moisture and topcoat UV exposure.
Slab moisture in Los Angeles runs above the national average in winter and falls dramatically during summer heat. Every floor we pour starts with a calibrated moisture test, not a visual call. UV exposure on outdoor patios and pool decks rules out bare epoxy and pushes us to polyaspartic or UV-stable topcoat chemistry.
Where we pour in Los Angeles
Brentwood, Pacific Palisades, Beverly Glen, Hollywood Hills, Silver Lake, Echo Park, Hancock Park, Mid-Wilshire, and the rest of the Los Angeles footprint. Access via I-405, US-101, I-110. Most Los Angeles jobs schedule three to seven days out for the walkthrough, then four weeks out for residential pours, two weeks for commercial.
Most-requested in Los Angeles
- Metallic epoxy garage floors (the most-photographed system in our gallery)
- Garage coatings with flake-broadcast or quartz-broadcast traction
- Polyaspartic patio coatings (UV-stable, salt-air compatible on coastal jobs)
- Decorative concrete patios, walkways, pool decks
- Commercial epoxy for Los Angeles office, retail, restaurant, and warehouse spaces
Los Angeles, CA. We pour throughout the city, with I-405 as the primary access corridor.
Local context.
A few Los Angeles-specific notes that come up on most walkthroughs.
Climate
marine-layer mornings, summer heat domes pushing into the basin, occasional Santa Ana wind events that swing humidity hard. Slab moisture testing is non-negotiable on every Los Angeles pour because of how the seasonal swings work here.
Access
Shop access via I-405, US-101, I-110, I-10, I-5. Los Angeles is within the 100-mile pour radius from Walton Avenue, Los Angeles.
Common substrates
Los Angeles residential garages are typically 4-inch poured concrete from the original construction era. Older homes particularly in older sub-areas sometimes need crack repair before any coating goes down.
Most-requested system
Metallic epoxy for residential garages, polyaspartic for patios and pool decks, decorative stamped concrete for backyard living spaces.
Los Angeles neighborhoods we pour in.
Los Angeles core
- Brentwood
- Pacific Palisades
- Beverly Glen
- Hollywood Hills
Los Angeles mid
- Silver Lake
- Echo Park
- Hancock Park
- Mid-Wilshire
Los Angeles outer
- DTLA
- Westwood
- Cheviot Hills
- View Park
Plus the rest of the Los Angeles footprint and adjacent unincorporated areas inside the 100-mile pour radius.
What Los Angeles jobs actually look like.
Twelve months of Los Angeles work points at a consistent pattern: residential garage floors lead the volume, decorative concrete patios run second, commercial spec floors round out the rest.
Residential Los Angeles garages
The most common call. Two-car attached garages in the 380 to 480 sq ft range, slab age 15 to 60 years, almost always need light to moderate crack repair before coating. Standard system: metallic epoxy with polyaspartic topcoat, two-day install. What moves the number is square footage, how much crack repair the slab needs, and which finish system you pick. Color choice is the slow part of the proposal; the install itself is straightforward.
Los Angeles backyards and patios
Decorative concrete patios, pool decks, BBQ extensions, and walkways across the Los Angeles footprint. Most are 300 to 800 sq ft. Stamped concrete with two-color integral plus accent release prices out on pattern complexity, color count, and the condition of the base slab. The walkthrough takes 45 minutes so we can inspect drains, expansion joints, and any tile or wood deck the new pour ties into.
Small commercial + shop floors
Los Angeles retail backrooms, light industrial shops, restaurant kitchens, and detail-shop bays. Square footage usually 600 to 4,000. Polyaspartic-only systems for fast turnaround, quartz-broadcast where slip rating or USDA compliance matters. We schedule around operating hours; off-hours premium applies but the saved revenue usually offsets.
Questions before the call.
How fast can you get to a job in Los Angeles?
Los Angeles sits within the 100-mile pour radius from our Walton Avenue shop, accessed via I-405 and US-101. Walkthroughs typically schedule three to seven days out. Pours book four weeks out for residential and two weeks for commercial.
Do you pour metallic epoxy in Los Angeles?
Yes. Metallic epoxy is one of our most-requested systems in Los Angeles, particularly for residential garage floors in Brentwood, Pacific Palisades, Beverly Glen, and surrounding neighborhoods. The walkthrough is on us; the proposal lands the next morning.
What does Los Angeles epoxy cost in Los Angeles?
Residential pricing for Los Angeles epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.
It depends on your slab, so we price it in person. The walkthrough costs nothing and takes about half an hour. The next morning you get a fixed price by email, and that number holds through the pour.
How long does a Los Angeles job take to install?
A standard residential pour runs two to three working days from prep to final topcoat. Larger residential or commercial pours can run four to fifteen days depending on system spec, substrate condition, and square footage.
Once the final coat is down, stay off it for 24 hours. At 72 hours the floor takes full vehicle traffic.
What about Los Angeles climate, will the floor hold up?
The Los Angeles climate brings marine-layer mornings, summer heat domes pushing into the basin, occasional Santa Ana wind events that swing humidity hard. Our system specs (polyaspartic topcoat for UV exposure, polyurea joint fill for thermal swing, calibrated moisture testing on prep day) account for these conditions specifically. Every floor we pour in Los Angeles is built to the same lifetime-adhesion spec we apply on coastal-marine, high-desert, or central-valley jobs.
What happens after the floor is poured?
Most of what decides how the floor ages happened on prep day, before the pour. Once it cures, the floor mostly takes care of itself: the base resin stays bonded to the substrate for the life of the floor, and only the gloss layer on top ever gets a second visit from us.
Upkeep is a mop and a bucket of water. The topcoat carries the protection, so you never roll on sealer or schedule a yearly wax.
Pour in Los Angeles.
Free walkthrough on your slab in 30 minutes. Fixed-price proposal next morning. (714) 702-2567 or fill the form below.