Healthcare Epoxy in Los Angeles.

Residential pricing for healthcare epoxy in the Los Angeles market typically runs between the ranges quoted on our service pages, with the exact number determined by substrate condition, finish system, and square footage. Commercial pricing is always project-specific.

We write fixed-price proposals after the on-site walkthrough so there are no change orders mid-pour. Walkthrough is free, takes about 30 minutes, and you have the proposal in your inbox the next morning.

A residential pour usually has us on site for two to three working days. The walkthrough tells us where your floor falls, since a larger home or a commercial space can stretch the job to anywhere from four to fifteen days depending on spec, substrate and footage.

The polyaspartic topcoat cures fast, so the wait after we finish is short: one day before foot traffic, three days before anything on wheels.

Properly installed resinous floor systems are not cosmetic. They are a chemical bond to the substrate. Residential floors are engineered for lifetime adhesion to the slab.

There are two answers, depending on the floor. Residential: the base resin holds, and the topcoat may need a refresh at 8 to 12 years with heavy use. Commercial: we spec the system to the traffic and chemistry it will face, and the resin layer typically lasts 10 to 25 years.

If it is a metallic system, yes. Past pours run from deep teal and copper-on-bronze to matte slate and ocean blue with charcoal veining, and the pigment will mix to shades well beyond those.

For decorative concrete there are two routes: integral color mixed in during the pour, or a topical stain once the slab has cured. Coatings give you more room. Flake comes in pre-blended packs or any custom blend, and quartz offers 14 standard colors plus custom mixes.

Every job follows the same four-stage workflow. Day one is walkthrough and moisture test. Day two is diamond grinding to a CSP-3 profile and crack repair. Day three is the pour, broadcast, and signature work. Day four is the polyaspartic topcoat. We do a final inspection with you on-site and hand you a written job spec before we leave.

Nothing much, which is the point. Once the cure window passes the floor is yours, and the base resin stays bonded to the slab for as long as the floor is there.

Day to day, the floor maintains with a damp mop. No waxing, no sealing, no annual service appointment. The system is engineered to live without us.

Three things, honestly. One, the owner walks every job and is on every prep day. We are not a franchise. Two, we are licensed and trained across resinous coatings AND decorative concrete AND structural slabs. Most LA shops pick one trade. Three, surface prep is non-negotiable: diamond-grind to CSP-3, HEPA-vacuum, re-grind. Most cosmetic failures trace back to skipped prep.