Anaheim service
Metallic Epoxy in Anaheim.
A pigmented two-part epoxy poured wet, swirled with a torch and a notched trowel, and sealed under a polyaspartic topcoat. The cured floor reads as liquid stone. No two pours are alike. In Anaheim it mostly goes into garages, and a good share of those sit in Anaheim Hills and West Anaheim.
Metallic Epoxy for Anaheim.
Metallic requests in Anaheim are mostly residential garages, usually two-car attached ones. The pattern happens during the pour: the crew moves the wet pigment with the torch and the notched trowel, and the floor keeps whatever movement it had when the resin set.
The Anaheim angle
Anaheim gets Orange County’s inland weather, hot in summer and mild in winter, and the slabs feel it. Moisture in the concrete runs high through the cooler months and drops off once the heat arrives, and a metallic finish is only as good as the slab it sits on. So every Anaheim garage gets a calibrated moisture reading on prep day before we open a can of pigment.
The system
- Pigment blending to match any color (deep teal, copper-on-bronze, mother-of-pearl, ocean blue, just-black)
- Torch and notched-trowel finishing for the swirled stone look
- Polyaspartic or polyurethane topcoat within the resin’s chemical window
- Engineered for lifetime adhesion on residential installations
Anaheim pricing and timeline
Cost: Square footage, slab condition, and how much custom color blending the pour calls for. Commercial numbers scale with substrate prep and topcoat spec. You get a fixed-price proposal, not a range.
Timeline: A standard two-car garage runs two to three working days. Larger residential or commercial pours can run four to five days.
Lifespan: Engineered for lifetime adhesion on residential. The gloss layer can be refreshed at the 8-to-12-year mark on heavy-use floors. Commercial systems are spec’d 10-25 years.
Where in Anaheim
Garage metallic comes up most in Anaheim Hills, the Platinum Triangle and West Anaheim, and we pour it in Olive Hills and around the Anaheim Resort too. The crew comes in on I-5, CA-91 or CA-57.
Anaheim, California. We pour metallic epoxy throughout the city.
What shapes a metallic floor in Anaheim.
Metallic is one of the systems Anaheim homeowners ask us for most, and nearly all of it goes into garages. Here is what decides how one turns out.
Older slabs, repaired first
Anaheim garages are usually 4-inch slabs poured with the house, somewhere between 15 and 60 years ago, and nearly every one has cracks. We repair them before any resin goes down so no crack line runs through the swirl. Homes in the 1940s to 1960s neighborhoods can need more of that work.
Pigment mixed for one floor
We mix the metallic pigment for your floor, and deep teal, copper-on-bronze, mother-of-pearl and just-black have all come off our trowels. The movement comes from the torch and the notched trowel while the epoxy is still wet, which is why two garages poured in the same color never match each other.
A topcoat for inland sun
Anaheim summers put a lot of UV on a garage floor whenever the door is up. Uncoated epoxy ambers in that light, so the metallic layer always goes under a polyaspartic topcoat, which is UV-stable and stays clear. That topcoat is also the only layer a busy floor ever needs redone.
Other services in Anaheim.
Want a floor without the swirl? These are the other systems and the concrete work we take on in Anaheim.
Resinous coatings
Decorative concrete
Full Anaheim service area
Questions before the call.
How fast can you pour metallic epoxy in Anaheim?
We can usually walk your garage three to seven days after you call. Residential metallic pours book about four weeks out and commercial ones about two, and the crew reaches Anaheim on I-5 or CA-91.
What sets the price of metallic epoxy in Anaheim?
The square footage, the crack repair and grinding your slab needs, and how much custom color blending the pour calls for. Older Anaheim garage slabs vary a lot in how much prep they take, so we price after seeing yours.
The walkthrough costs you nothing. The proposal that follows is one fixed price, so nothing changes once the pour starts.
How long does metallic epoxy take to install?
A residential pour usually has us on site for two to three working days. The walkthrough tells us where your floor falls, since a larger home or a commercial space can stretch the job to anywhere from four to fifteen days depending on spec, substrate and footage.
Give the topcoat a day before you walk on it, and three days before the car goes back in.
How long will my metallic epoxy last?
The metallic coat bonds chemically to the slab, and a residential install is built to hold that bond for the life of the floor.
What wears is the polyaspartic gloss on top. On a hard-used garage it may want a fresh coat someday, and the metallic pattern underneath stays exactly as it was poured.
Can you match a specific color?
Usually, yes. Show us the color you are after at the walkthrough and we mix the pigment toward it. Ocean blue with charcoal veining and matte slate are two we have poured.
The color we can match. The way it moves across the floor comes from the torch and the trowel, so the pattern belongs to your garage alone.
What happens after the floor is poured?
The owner who walked your garage before the job is the person you call after it, if anything about the finish bothers you. The metallic layer stays bonded where it is; only the gloss coat on top would ever need work.
Once we are packed up, you should not need us for routine care. Damp-mop it when it looks dirty. Skip the waxes and sealers sold for bare concrete; this floor has no use for them.
Metallic Epoxy for your Anaheim space.
Free walkthrough in 30 minutes. Fixed-price proposal next morning. (714) 702-2567 or the contact form.